
4-Channel Vehicle Audio Bass Amplifier - 500 Watts Max High-Powered Mono Bass Amplifier w/Subsonic Filter and Low Pass Filter Stable at 1 ohm, LED Indicators, Sound Specialization - BANDA 2000.41OHM
Amazon Price as of 03/04/2025 08:12 GMT+00:00
$269.00
Deal Detector and Price History
We analyze price history to spot good deals

Include Prime Price
Bad Deal
average price $259.37
$9.63 higher than average
$239.75
$259.25
Product Description
BANDA ELITE 2000.41OHM Four Channel 500 Watts Max @ 1 Ohm Car Audio Amplifier. Total Power 12.6 @ 2 Ohms: 4 x 500 WRMS and Total Power 12.6 @ 4 Ohms: 4 x 300 WRMS. Do not use an impedance load lower than the amplifier specification. This can damage the equipment. Use wire solder for tinning the cable end for better electrical contact. Loose electrical connections can cause malfunction, heating and even fire. The GND connection must be as short as possible, using an adequate wire terminal firmly connected to a clean, paint-free spot at the car chassis. It allows you to adjust the Crossover by the selector key: LOW, FLAT e HIGH.
• POWER SUPPLY: Class D amplifier, Total Power 14,4 @ 1 Ohm: 4x600 WRMS, Total Power 14,4 @ 2 Ohms: 4x400 WRMS, Total Power 14,4 2 Ohms Bridged: 2x1250 WRMS, Total Power 12,6 2Ohms Bridged: 2x1000 WRMS, 2 Ohms Efficiency: 81%, 1Ohm Efficiency: 76%
• MONO BASS AMPLIFIER INDICATORS: Blue LED: source and powered amplifier indicator, Red LED: output distortion (clipping), Constant - output short circuit indicator, Yellow LED: low voltage battery, Constant - Fuse blown or missing
• POWER OUTPUT AND IMPEDANCE: Input Voltage: 9 to 15V, Input Impedance: 100K Ohms, THD+Noise: less than 0.10%, Input Sensitivity: 220mV to 4V, Signal to Noise Ratio: 80dB
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound
• OTHER TECHNICAL SPECS: Recommended Fuse: 100A, Current @ Rest: 1A, Ave. Sinusoidal Current Draw: 210A, Ave. Music Current Draw: 100A, Recommended Power Wire Gauge : 21mm/4 AWG, Recommended Speaker Wire Gauge: 2x2.5mm/2x13 AWG, Size: 9.5 x 8.2 x 2.12''
Reviews
Review AI Summary