ART DualZDirect Dual Professional Passive Direct Box & Hosa CMP-153 3.5 mm TRS to Dual 1/4" TS Stereo Breakout Cable, 3 Feet

Product Description

ART DualZDirect Dual Professional Passive Direct Box The DUALZDirect provides two independent high quality totally passive interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs through high performance audio isolation transformers. Each of the high impedance single-ended 1/4″ inputs is converted by a transformer into an isolated, balanced, low impedance signal output. The DUALZDirect’s audio transformers have an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALZDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. The input ATTENUATOR switches allow for a wide range of signal levels and the input THRU jacks allows for tapping off of your signal chain. The GROUND LIFT switches let you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise. What further sets the DUALZDirect apart from other “DI” boxes are its extended features and versatility. We have added switchable low pass FILTERs that cut out all very high frequency interference. These Bessel filters on the outputs are placed out of the audio range and are primarily intended to reduce radio frequency interference before it gets into the main system. The filters are very effective in reducing any digital computer noise artifacts when using the DUALZDirect as an interface between a computer-based audio workstation and your monitors. The PHASE INVERT switches, while not normally included with your “run of the mill” DI box, have been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix. The compact black-anodized all aluminum case and it’s passive design allow the DUALZDirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the DUALZDirect the obvious choice. Hosa CMP-153 3.5 mm TRS to Dual 1/4" TS Stereo Breakout Cable, 3 Feet The Hosa CMP153 splits a Stereo Minijack signal into Left and Right quarter-inch connections. For 20 Years, Hosa has provided a cost effective solution to the cabling needs of musicians, engineers, and audio and video enthusiasts the world over. In an effort to further meet those needs, Hosa continues to add new products that make the creative individual's life easier. Indeed, much of what Hosa offers is the direct result of suggestions made by customers and retailers. Hosa Stereo 1/8" TRS to Two Mono 1/4" TS Cable This cable is designed to connect an audio device with a mini stereo phone output to pro audio gear with unbalanced phone inputs. It is ideal for connecting an iPod®, laptop, or similar device to a mixing console. Features include: Nickel-plated plugs for rugged durability and efficient signal transfer Oxygen-Free Copper (OFC) conductors for enhanced signal clarity OFC spiral shields for effective EMI and RFI rejection and flexibility Connector(s): 3.5 mm TRS to Dual 1/4 in TS Length: 3 ft Similar Products to Consider Hosa Cable CPP202 Dual 1/4 Inch To Dual 1/4 Inch Cable - 6.5 Foot No better cable exists for easy and cost-effective connections of synthesizer modules, keyboards, samplers, and outboard gear than the Hosa Cable Dual 1/4 Inch To Dual 1/4 Inch Cable. Hosa Cable CPR202 Dual 1/4 Inch To RCA Cable - 6.5 Foot The Hosa Cable Dual 1/4 Inch To RCA interconnects are in use on stages and in home studios all over the world. Hosa Cable CMR206 Stereo 1/8 Inch to Dual RCA Adapter Cable - 6 Foot The Hosa Cable CMR200 series adapter cable has a stereo minijack connector on one end and two RCA connectors on the other.

• Product 1: Fully passive, high performance transformer design. No battery required. • Product 1: Converts 50k ohm inputs into 600 ohm balanced outputs • Product 1: Switchable input attenuation (0, -20, -40 dB) Switchable low pass filter • Product 1: Switchable phase invert • Product 2: 1/4-inch Plugs Color coded - Red and White • Product 2: Scores of applications in live performance, recording and computer multimedia settings • Product 2: Nickel-plated plugs for rugged durability and efficient signal transfer • Product 2: Oxygen-Free Copper (OFC) conductors for enhanced signal clarity