
E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (11 LB)
Amazon Price as of 02/25/2025 12:45 GMT+00:00
$38.94
Deal Detector and Price History
We analyze price history to spot good deals

Include Prime Price
Bad Deal
average price $34.07
$4.87 higher than average
$31.64
$36.51
Product Description
Instructions: Clean the weld zone of contaminants as well as possible. A small AC machine or DC machine (electrode + reverse polarity or – straight polarity) can both be used! AC will prevent arc blow, DC+ reverse polarity produces deeper penetrating welds on medium gauge steels and DC- straight polarity on thinner or light gauge steels. Set amperage to the proper range as listed on the product recommended amperage chart. Maintain a short arc length and hold the electrode at a 15° angle and use a slight back and forth whipping motion. If overhead welding, use a straight circular motion. For vertical-down welding, choose amperage in the upper end of the recommended range and use stringer beads or a slight weaving technique keeping the weld puddle in place by pointing the electrode up into the puddle. For vertical-up welding, use amperage settings in the lower end of the recommended range and use the shelf or step method adding layer on top of layer. Do not use whipping motion. Allow the part to air-cool and remove slag with a chipping hammer and brush to a nice finish.
• All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills
• Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage
• One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities
• This electrode has a soft, steady and quiet arc that produces very little smoke or spatter
• Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters.
Reviews
Review AI Summary
🔥 Top SÜA deals you shouldn’t miss!

SÜA® Heavy Duty Oxy-Fuel Torch Cutting Attachment compatible with Victor model CA2460
-9% $41.85
View at Amazon
SÜA® - Medium Duty Oxy-Fuel Torch Cutting Attachment compatible with Victor model CA1350
-9% $32.59
View at Amazon
SÜA 36" Heavy Duty Straight Cutting Torch 90° Head - Compatible with ST900FC + Cutting Tip (Acetylene)
$123.87
View at Amazon
SÜA Heating Nozzle/Rosebud 10-MFA Replacement for 300 Series Victor Torch Handles. Oxy/Acetylene
-26% $36.95
View at Amazon
SÜA Heating Nozzle/Rosebud 8-MFA Replacement for 300 Series Victor Torch Handles. Oxy/Acetylene
-17% $26.37
View at Amazon
SÜA Heating Nozzle/Rosebud 6-MFA-1 Replacement for 100 Series Victor Torch Handles. Oxy/Acetylene
-12% $18.38
View at Amazon
SÜA 25 Series Gas Welding & Cutting Kit Oxygen Torch Acetylene Welder Outfit
-35% $197.56
View at Amazon
Welding Torch Tip cleaner, Carburetor Cleaning Tool, Stainless Steel, 100 mm - SÜA
-35% $6.89
View at Amazon
SÜA® - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18" x 1/8" - (2 Lb)
-24% $40.06
View at Amazon
SÜA® - RG-60 - Oxy-Acetylene Carbon Steel Welding Rod (R60) - 36" x 3/32" (2 Lb)
-42% $21.01
View at Amazon
SÜA® - RG-60 Copper Coated - Oxy-Acetylene Carbon Steel Welding Rod (R60) - 36" x 1/8" (2 Lb)
$23.46
View at Amazon