etoolab Battery Adapter for Dewalt 20v, for Milwaukee Battery Adapter 18V, for Power Wheels Battery Adapter with LED Display, Fuse, Wire Terminal, 14 AWG Battery Converter for DIY 2 Pack

Product Description

ETOOLAB Battery Adapter Equipped with a mini LED screen, you can see the real-time current and voltage at a glance and make a quick judgment on whether the battery pack is suitable for the device. Operating Steps 1. Turn off the battery pack converter; 2. Connect the load to the battery pack converter. (Please pay attention to the positive and negative poles and be careful not to connect them in the opposite direction) 3. Insert the battery pack and turn on the load switch. Place your hand on the converter switch, try to turn it on for about 3 seconds, and constantly observe the reading of the ammeter: ① If the reading is 0 to 3 A: The load is likely suitable for an 18V battery pack and can be connected to an ETOOLAB converter; ② If the reading is 3 to 8A: The load may be suitable for 18V battery packs. It is recommended to connect and use the ETOOLAB converter with caution; ③ If the reading is 8 to 10A: The load is barely suitable for an 18V battery pack. You can carefully connect the ETOOLAB converter, but you need to always be careful; ④ If the reading is more than 10A: The load is basically not suitable for an 18V battery pack, and it is not recommended to connect and use an ETOOLAB converter. NOTE: In some cases, you can connect two converters in series to achieve 36V, but please be sure that the two batteries are both fully charged. If the reading of the voltmeter is lower than 13.75V, it indicates that the remaining power of the battery is low. Please stop using the battery. Package Content: 2 x Battery adapter compatible with Dewalt 2 x Wire terminal connector 2 x Hex screw 8 x Fuse(two in the adapter) 10 x Heat shrink butt wire connectors User manual

• 💯Well Compatible with dewalt & Milwaukee battery: Perfectly compatible with Dewalt 20V /18V DCB series battery, such as DCB203, DCB204, DCB205, DCB206, DCB230, DCB324 ect. This 20V battery adapter is suitable for power wheels, RC toys, robotics, and other DIY projects. • 💯Easy to use: The battery adapter for dewalt will come with a wire connector, so you can use it much more easily. The first step is to connect your load with the adapter by the included wire connector, try to turn it on for about 3 seconds, and constantly observe the reading of the ammeter. If the reading is in 3-8A, just start to enjoy. If the reading is more than 10A, the load is basically not suitable for an 18V battery pack. • 💎Premium Material & Practical Design: Our ETOOLAB adapter for power wheels is made of high-quality ABS, which has a good effect on moisture-proof and anti-corrosion, suitable for both indoor and outdoor use. We use 14 AWG copper wire to improve the conductivity and safety, and equipped the product with a 30Amp fuse to protect your battery from damage. Compared with other adapter for power wheels, we have a built-in switch to ensure you can control the battery easily. • 💎Real-time Current and Voltage Display: Our battery adapter for milwaukee is equipped with a mini LED display, so you can see the real-time current and voltage and judge whether the battery pack is suitable for the connected load easily. Effectively protect your battery and the device. • 💎Warm Tips: The red wire should be connected to the positive terminal, and the black to the negative terminal. When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter, and the two wires shouldn't be in contact. If you don’t use it for a long time, please be sure to remove the battery from the adapter.