Mini LED PIR Motion Sensor Switch, DC 5-24V 2A Infrared Activated LED Switch Controller with USB Couple Cable for LED Strips Lights

Product Description

PIR motion sensor is an infrared human sensor switch, controlled by motion, widely used in LED strip, motion lighting, human monitoring, automatic sensing device, etc. Specification: Product Name: PIR motion sensor Connector type: USB Color: White Material: plastic material Output current: <2A Operating voltage: DC 5-24V Output power: <20W Delay time: 5-3600 seconds Size: 36x36x27 mm/1.42x1.42x1.06 inch(L*W*H) Total length (including cable): 30.5 cm / 12 inches Package Contents: 1 x PIR motion sensor with USB coupler cable, 1 x screw, 1 x round double-sided sticker Advantages The LED sensor is designed with ABS plastic, very durable and well insulated. The mini size does not take up much space. The switch setting can be delayed from 5 to 3600 seconds, saving time and energy. Infrared auto-sensing device no longer need to manually switch the light on and off, freeing your hands. How to use it? 1. When the PIR sensor is activated, the signal triggered by the module is unstable and needs 1min warm-up time to work properly. 2. The installation direction is left and right, the signal will be better. What should I pay attention to? 1. Please don't expose it to direct sunlight, heater, strong wind or air conditioner. 2. Please don't fix it on the obstacle where infrared ray can't penetrate. 3. The signal output line and input line of the controller should be connected correctly.

• PIR motion sensor : The infrared human sensor switch are widely used in LED light strips, motion lighting, human monitoring, automatic sensing devices, etc. through motion control. • parameters: The LED motion sensor switch output current: <2A; Operating voltage: DC 5-24V; Output power: <20W; Delay time: 5-3600 seconds; Size: 36x36x27mm/1.42x1.42x1.06 inches (L*W*H); Total length (including cable): 30.5cm/12" • Advantages：1. The LED sensor is designed with ABS plastic, which is very durable and well insulated. 2. Mini size does not take up space. 3. The switch setting can be delayed from 5-3600 seconds, saving time and energy. 4. Infrared auto-sensing device no longer needs to manually switch the light on and off, freeing your hands. • Tips for Use：When the PIR sensor starts, the signal triggered by the module is unstable and needs a warm-up 1min to work properly. The installation direction is left and right, the signal will be better. • Note：1. Please do not expose it to direct sunlight, heater, strong wind or air conditioner. 2. Please do not fix it on the obstacle that infrared can not penetrate. 3. The signal output line and input line of the controller should be connected correctly.