Dealscount Logo
pool mate 1 2702 cleaner swimming
Pool Mate

Pool Mate 1-2702 Pool Filter Cleaner for Pools, 1-Quart

Amazon Price as of 01/16/2025 12:15 GMT+00:00

$24.49

Deal Detector and Price History

We analyze price history to spot good deals

Include Prime Price

Good

average price $20.74

$3.75 higher than average

$24.49 now

$17.81

$26.06

Product Description

This liquid filter cleaner greatly improves filter life and efficiency. It is specially made to cleanse suntan oil, and grease as well as scale and mineral deposits from pool and spa filters of all types: cartridge, sand, and D.E. Regular use of this product will assure proper filtration. SAND FILTERS: Turn off inlets and outlets for all chemical feeders. Close main drain and place filter in backwash position. Slowly add one quart Filter Cleaner through skimmer while backwashing. Filter Cleaner can also be added through the sand fill port. Run filter until product begins to come out of the backwash water or until the product is seen through a filter viewing cell. Soak filter for 30 to 60 minutes. After soaking, backwash filter until water comes out clean and foam clears. Reverse procedure and start normal filter operation. For sand filters containing more than 300 pounds of sand, add two quarts Filter Cleaner. CARTRIDGE FILTERS: Stop filter operation.Bleed off excess pressure through the filter safety valve. Open filter unit, remove cartridge from filter, and rinse excess loose dirt with a water hose from top to bottom. Place cartridge into a container of appropriate size and add 1 quart Filter Cleaner and 5 gallons water. Make sure filter unit is completely covered by the cleaner. Soak 30 to 60 minutes. After soaking, rinse with hose at maximum pressure to remove excess Filter Cleaner or until foam residue is completely washed off. Re-install cartridge and resume normal filter operation. DIATOMACEOUS EARTH FILTERS: Stop filter operation. Bleed off excess pressure through safety valve. Remove filter elements (grids) from filter and rinse off excess dirt with a hose from top to bottom. Place grids in a bucket and add 1 quart Filter Cleaner and 5 gallons water. Make sure grids are fully immersed in cleaner. Soak 30 to 60 minutes. After soaking, rinse out filter cleaner with hose at maximum pressure. Re-install grid and add new filter media. Resume filter operation.

• Cleans sand, cartridge, and diatomaceous earth filters • Improves filter efficiency • Cuts away grease, body oils, mineral deposits, scale and suntan lotion

Reviews

Review AI Summary

🔥 Top
deals you shouldn’t miss!