Raytech 6" 150 MM Bowl - Magnetic Tumbler Jewelry Finisher - Programmable

Product Description

The machine is a direct drive, fan cooled design. Its magnetic disk is made up of many powerful magnets that are precisely placed in a cast disk. The alternating polarity is consistently changing, thereby allowing the media to move freely in a liquid solution that constantly changes its makeup. This, combined with centrifugal force, allows for super quiet and fast cycles. With stainless steel pins as small as . 010 inch diameter and . 250 inch in length, they are able to work in areas such as undercuts, recesses, slots, etc. , where no previous method has been found suitable. Centrifugal magnetic finishing is quiet by comparison to many other forms of finishing. On soft non-ferrous metals, the finishing cycle can be as low as 30 minutes. Centrifugal magnetic tumbling as an automated process addresses the most intricate and detailed parts imaginable in finishes where others fail. It should be noted that on large, smooth or flat surfaces the finish will appear frosted and a slight buffing or a dry finish is recommended.

• CMF-610 • Programmable, variable speeds, FWD/REV & timer • 20-30 ring capacity or work piece capacity up to 150 grams • 6" bowl size Steel pin capacity 100-150 grams or up to 5 ounces • Dry bowl option use corn cob, nut shell, wood media • Use with Raytech Compound M Solution • 1/12 HP motor in 115 V ( 2 . 5 amps) only • Includes 250 grams of . 5mm steel pins