Shikiy Hot Wire Foam Cutter Table Tabletop Hot Wire Foam Cutter Portable Lightweight Hot Wire Foam Cutting Machine Styrofoam Cutter Working Table Tool Sponge Styrofoam Cutting Machine for Foam Sponges

Product Description

Description This practical foam cutting machine allows fast and precise cutting of foam, saving you a lot of time and effort. It is suitable for school projects, artists, and factories to make billboards, crafts, and molds. This tool offers a great way to unleash your creativity. It will be the ideal choice for you! Application The foam cutting machine is used to cut foam, sponge, pearl cotton, and other hot-melt materials with a melting point below 350℃. It can cut angles, cylinders, sharp cones, rings, tapers, straight lines, and other shapes. How to Install 1. Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws. 2. Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut. 3. Pull out the heating wire about 30cm/11.81in from the wire wheel. 4. Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off. 5. Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic. Specification Material: Multi-layer Panel and Stainless Steel Color: Light Blue, Silver Input Voltage: 100-240V AC Output Voltage: 18V/4A DC Power: 72w Plug: US Standard Adjustable Temperature Range: 0-500°C/0- 932°F Cutting Height: 0-25cm/0-9.84inch Heating Wire Diameter: 0.28mm/0.01in Cutting Width: 0-28cm/0-11.02in Worktable Width: 33cm/12.99in Workbench length: 39cm/15.35in Packing Size: 44*38*10cm/17.32*14.96*3.93in Gross Weight: 3.5kg/7.7lbs Net Weight: 3kg/6.6lbs Package Included 1* Worktable 1* L-shape Conductive support 1* Guiding Rule 1* Circular Die 1* Angle Board 1* Adapter 1* English Manual All Accessories for Use

• High Efficiency: This high-powered foam cutting machine features electric wire cutting which provides fast, accurate, flat cuts and clean edge sealing to increase your productivity. • Precise Cutting: The worktable is thoughtfully designed with scales on all four sides making it easy for you to accurately measure each piece of material. The 0.01in heating wire design allows for more accurate cutting and less error, as well as a lower loss ratio. • Easy to Install: Thanks to its simple construction, the complete range of accessories, and the instruction manual, you can easily install it in a short time. • Adjustable Voltage: The adapter has a voltage adjustment knob that allows you to adjust the temperature (0-932°F) by controlling the voltage level for cutting different materials and thicknesses and getting better cutting results. • Adjustable Support: You can change the position of the electric wire by adjusting the angle of the support to cut different shapes of material. The tilting angle allows for beveled, vertebral cuts. When the holder is 90 degrees perpendicular to the table, it can be used to cut squares, squares, and cylinders.