switch display module trigger adjustable

Hilitand DC 6-30V Cycle Delay Timer Switch LED Display Delay On/Off Relay Module 0.1s to 999min Adjustable

Name: Hilitand DC 6-30V Cycle Delay Timer Switch LED Display Delay On/Off Relay Module 0.1s to 999min Adjustable
Brand: Hilitand
Price: 7.13 USD

Amazon Price as of 02/25/2025 01:30 GMT+00:00

$7.13

Price alert

Buy on Amazon

Deal Detector and Price History

We analyze price history to spot good deals

Include Prime Price

Good

average price $6.55

$0.58 higher than average

$7.13 now

$5.21

$7.67

Price History

Product Description

1. Working Mode: P1: After , the relay opens for "OP" time, and then disconnect; in the "OP" time, as follows: P1.1: is triggered again, invalid P1.2: is triggered again, restart the timing P1.3: Give , the relay closes for "CL" time, then opens for OP" time; After finishing the timing, disconnect the relay; P3.1: Give , the relay opens for "OP" time, then closes for CL" time, then the cycles; if give again during the cycle, the relay opens, stop timing; the cycles times ( "LOP ") can be set. P3.2: No triggering required after power on, the relay opens for "OP" time, then closes for "CL" time, then the cycles; the cycles times ( "LOP ") can be set. P-4: holding function: If there is , timing is cleared, the relay remains on; when the disappears, after "OP" time, the relay is off; if another is triggered during timing, timing will be cleared. 2. Parameter Description: "OP" - on time, "CL" - off time, "LOP" - cycle times (1- times, "---" means infinite loop). These parameters are independent of each other, but are shared by each mode. In the main interface (display 000), short press "SET" button will display "OP" ( "CL", "LOP") and the corresponding time XXX; If the mode (such as the mode P1.1, P1.2, P1.3) only has "OP" time, short press the "SET" key to display only the "OP" and the corresponding time; Some (such as the mode P3.1, P3.2) have parameters "OP", "CL", "LOP", short press "SET" button will display "OP" and the corresponding time, "CL" and the corresponding time, "LOP" and the corresponding number of times;

• Specification: Supply voltage: DC 6-30V, : High level (3.0V-24V) (The and system don't use the same GND port), Output capacity: DC 30V/5A, AC 220V/5A, Static current: 20mA, Working current: 50mA, Working temperature: -40~85. • Module highlights: 1. Wide voltage power supply (6~30V) supports micro USB 5.0V power supply. 2.The interface is clear and simple, powerful, easy to understand. 3. One button emergency stop function (STOP button), with reverse polarity to prevent burn-out. • How to Set Timing Range: After setting the parameter value at mode selection interface, short press "STOP" button to set the timing range; ①XXX. - timing range: 1 second to seconds. ②XX.X - timing range: 0.1 seconds to 99.9 seconds. ③X. X. X. - timing range: 1 minute to minutes. • Sleep Mode: 1. "C-P" Sleep mode: No for five minutes, the digital display automatically turns off, the program runs as usual; 2. "O-d" Normal mode: digital display turns on all the time; Press and hold the "STOP" button for two seconds to switch "C-P" and "O-d" state, the current state flashes and then return to the main interface. • Parameter setting and saving, Different OP, CL, LOP parameters can be set. These parameters are independent of each other and saved separately. All setting parameters are automatically saved after power-off.

🔥 Top Hilitand deals you shouldn’t miss!

aluminum spindle bracket screws diameter

Aluminum CNC Spindle Motor Mount Bracket Clamp with Screws 52mm Diameter, Silver Spindle Mount Bracket

-23% $12.96

Great

Lowest