
Vacancy Inwall LED Motion Sensor, Manual-ON Automatic- Off, Adjustable Time Delay, Single Pole Light or Fan Switch Replacement, Neutral Wire Required, White
Amazon Price as of 05/01/2025 16:40 GMT+00:00
$26.40
Deal Detector and Price History
We analyze price history to spot good deals

Include Prime Price
Bad Deal
average price $18.69
$7.71 higher than average
$14.84
$22.55
Product Description
Vacancy Sensor (Manual On Auto Off) Operation
Passive Infrared Wall Switch Vacancy Sensor
Rated: 120VAC, 60Hz, 0~600W
Replaces a standard light or fan single-pole switch
Works with incandescent, MLV, ELV, 1/6hp
Works with fluorescent and CFLs (maximum 30Watts)
Covers an area up to 24ft x 25ft (600ft²), 180º
Requires a neutral line
Adjusting time delay from 1 minute to 30 minutes
Simple three wire + ground installation takes only minutes and no adjustments are required
PARAMETERS
Voltage: 120VAC, 60Hz
Coverage: 150° or 180°, max.600 sq. ft.
Load requirements (single pole circuit):
Incandescent or fluorescent light: 0-600 Watt
Load Horsepower: 1/6 HP
Time Delay Adjustment: 1 min to 30mins
Operating Temp: 32° to 77°F (0°to 55°C)
Operating Humidity range: 95% RH, non-condensing. UL & CUL Listed and Conforms to California Title Code 24.
• Convenient and Decorative. Don't need to worry about leaving the light switch in the room, It can be attached to a wall or ceiling with its wide coverage of 150° or 180°, max.600 square feet, making it perfect for indoor or outdoor installation, giving light anywhere within your proximity. It also serves as an elegance improvement with the modern color and sleek design.
• Low Electrical Consumption. This Wall Sensor is 120VAC, 60Hz with the Manual ON (Vacancy) and Automatic OFF feature, you don't need to worry about any light being left open at home. It can also take the place of a lamp, light bulb, or fluorescent lighting without the use of an electrical socket/outlet. You can also control how long you want the light to be open by setting the timer from 1 minute to 30 minutes.
• Easy Installation and Secure. Simple three wire with ground installation takes only minutes and no adjustments are required giving you a wide variety of places to install it like in your bathroom, attic, kitchen or anywhere in your house. Also with the secure design and technology , it is guaranteed to avoid any tampering or electrical surge making it child proof.
• Neutral Wire Required. This motion sensor switch need neutral wire. Please review your wiring setup prior to purchase. Lights will flash as an indicator that it is not properly connected/activated. If you have any concerns, please consult with a licensed electrician for proper installation.
• Certifications and Parameters. This Occupancy Motion Detector is UL & CUL Listed and Conforms to California Title Code 24. 0-600Watt Incandescent or Flourescent Light Single Pole Circuit. 32° to 77°F (0°to 55°C) Operating Temperature.
Reviews
Review AI Summary