Bangle Dapping Die Small 20 Wave

Product Description

Now make patterned or "wavy" bangles and hoop earrings without the need for a hydraulic press! This Bangle Forming Die is easy to use. All you will need is heavy, lead-filled rawhide mallet and a sturdy benchtop. First create your bangle or hoop out of wire Next separate the halves of the die. Place your bangle in between the halves making sure to center it. Replace the top half of the die and give it a good solid WHACK! Now make patterned or "wavy" bangles and hoop earrings without the need for a hydraulic press! This Bangle Forming Die is easy to use. All you will need is heavy, lead-filled rawhide mallet and a sturdy benchtop. First create your bangle or hoop out of wire Next separate the halves of the die. Place your bangle in between the halves making sure to center it. Replace the top half of the die and give it a good solid WHACK! The solid steel die is designed so that the halves always line up perfectly. It also comes with 3 aluminum spacers to help keep your bangle centers (the spaces will get deformed during use, but that is ok). The die is approximately 3" in diameter and 1-1/2" thick.

• 3 inch by 1 1/2 inch • Make unique bracelets from wire or bangles • Can be used with hammer or hydraulic press