Stained Glass Kit Stained Glass Tools, Stained Glass Cutter and Running Pliers All in One Tool, Glass Drill Bit and Glass Hole Saw for Holes in Plant Pots, Glass Blocks, China or Glass Bottle Lamps.

Product Description

Stained Glass Cutting Kit – Not Just Any Stain Glass Cutter The Amazing Glass Cutter Made In UK A Glass Cutter And Running Plier Tool All In One Lets You Cut Straight Radius And Wavy Lines In Stained Glass, Mirror And Glass Tiles. The Stained Glass Scoring Wheel Is Not Sharp, It Is The Dullest Tool You Will Own But The Hardest, The Hardness Of The Stain Glass Cutter Wheel Along With The Special Angle Ground Into The Stained Glass Scoring Wheel Allows The Glass Cutter To Cut Thin And Thick Glass Materials And Hard Tile Without Dulling The Wheel. The Secret To Using The Glass Cutter Is To Follow The Instructions Carefully. Practice On A Spare Piece Of Stained Glass In Order To Work Out Enough Pressure To Apply, Usually Not Enough Pressure Is Applied To Start With But Sometimes Less Pressure Is Better So Practice Makes Perfect. Cutting On The Floor Instead Of On A Solid Board At Waist Height Will Fail And Will Cause Hairline Cracks In The Stained Glass Sheet. Not Oiling The Scoring Wheel And Making Sure It Is Turning Very Freely Will Cause The Wheel To Stick, Drag And Even Lock Up And Just Scratch The Glass Instead Of Scoring It And This Will Prevent The Glass Cutter From Working Correctly. Holding The Stained Glass Cutter By The Grips When Scoring You Will Only Be Applying Minimal Amount Of Pressure If Any On The Cutting Wheel And So The Required V In The Surface Will Not Be Created. Always Pull Towards You Never Push Away. For Stained Glass, Plate Glass, Picture Framing Glass Or Fused Glass The Cutting Wheel Should Be Oiled Every Single Score, Oil Will Run Onto The Glass And Will Not Only Cool Down The Glass And Give A Cleaner Cut It Will Also Extend The Life Of The Cutting Wheel. If You Wipe The Oil Off The Glass And There Is No Score Line, Then You Need To Increase The Pressure – Make Sure You Are Holding Close To The Wheel And Use The 2 Handed Method If Needed Especially If You Do Not Have A Lot Of Strength In Your Hands Or Are Cutting A Very Hard Material.

• STAINED GLASS CUTTING KIT - Watch Stained Glass Cutting Video Read Instructions Download User Guide. You Must Soak Stain Glass Cutter Tool Wheel in Glass Cutting Oil, Run Wheel Up And Down A Board To Check Wheel is Turning Easy So It Can Score Stained Glass Sheet Evenly, If Glass Cutter Blade Stops It Will Stick and Drag Across Glass And That Stops it Working. Scoring Wheel Must Be Oiled Every Cut. Practice On Stained Glass Sheet First to Make Sure You Have Got Glass Scoring and Break Technique. • HOLD STAINED GLASS CUTTER TOOL – Handles Of Glass Cutter Tool Are Only For Squeezing Glass To Break, Do Not Hold Stained Glass Cutter by Handles When Scoring. Hold Close To Wheel for Control And To Put Pressure on Blade. Technique is to Create Small V In Surface Of Glass Sheet. Scoring Way Too Hard Or Without Oiling Wheel Leaves Thick Groove And Dusty Line that Will Not Break Correct Instead Of A Shallow V, The Perfect Stained Glass Score Must Be Just Firm Enough To Leave the V Score in Glass. • CUT CURVES IN STAINED GLASS – Even Wavy Lines Are Possible If Stained Glass Tool Is Held Correctly And Instructions Followed. Draw Shape On Smoothest Side of Glass And Follow The Line With Stain Glass Cutter Tool Wheel. The Stained Glass Cutters Tool Must Be Held Perpendicular, Do Not Lean Cutter Over or It Will Slide Sideways And Glass Cutter Will Not Cut V In Stained Glass. Smooth Curves Are Ok Sharp Angles Are Not. Deep Curves Will Need To Squeeze The Score On Stained Glass From Both Sides. • RUNNING PLIERS STAINED GLASS – Place Stained Glass Cutting Tools Breaker Dead Center Over Score Line, Lift Glass Sheet, Squeeze Handles Ever So Gently At End. If Gap Is Too Big Fold Breaker Forward By Pivoting It To Make Gap In Between Pliers Small, This Allows You To Squeeze Very Thin Strips of Stained Glass. Over Squeezing Will Chip Edges. For Radius Cuts Angle Breaker Towards Score Line Dead Center. Cutting Small Strips Is Possible Within Laws Of Physics. Watch Videos If Any Of This Unclear. • GLASS DRILL BIT – 3/16” ¼” ½” Drill Bit For Glass Drill Bit For Bottles, These Glass Cutting Drill Bits For Drilling Holes In Glass Are To Be Used Wet, Glass Drilling Bits Will Also Drill Holes In Porcelain Tile So Not Just Drill Bits For Glass Sheet Also A Drill Bit For Glass Bottles And Drilling Holes In Glass Blocks For Making Wine Bottle Lamps And Lights. The ½” Glass Drill Bit is the Perfect size for Tree Lights to Push Through. On Flat Surfaces the Guides can be used To Hold Bits Straight