Juno Lighting Group IC928W Incandescent IC-Rated Super Slope Ceiling Downlight, 6 Inch, Galvanized Steel

Product Description

Product Description Juno 6 inch incandescent super sloped housing is IC-rated which allows housing to be completely covered with insulation - includes push in electrical connectors for easy installation From the Manufacturer The IC928W 6-Inch Super Slope Incandescent Housing is an IC rated, energy efficient Air-Loc new construction housing with fully sealed double wall construction for use in 7/12 to 12/12 pitch slopes (30-degrees to 45-degrees). Juno's patented Slope Ceiling Down-Lites direct light straight down, providing proper lighting from a sloped surface. The housing holds a medium base porcelain socket with nickel-plated copper screw shell that accepts an incandescent light bulb. The adjustable socket plate permits the bulb to remain perpendicular to the floor through entire pitch range. Bulb wattage ratings and apertures are based on trim selection. Installation is made easy with the Real Nail 3 telescoping system featuring bugle-headed nails for easy repositioning of housing in joist construction and integral T-bar clip to secure housing in suspended ceiling grid. Patented breakaway bars for tight joist spacing and curved foot facilitates alignment with joist bottom. Quick-Loc slot and oversized set screw lock fixture in position. Bar hangers may be re-positioned 90 degrees. The fully assembled IC928W includes a pre-wired junction box with (5) 1/2-Inch and (1) 3/4-Inch knockouts, (4) non-metallic sheathed cable connectors, ground wire and push-in electrical connectors for fast, secure installation. Oblique angle housing design holds trim flush with the ceiling while angle-cut baffles ensure grooves remain parallel to the floor to provide proper optics. UL Listed, C-UL/CSA certified for through-branch wiring, with a maximum of (8) 12-AWG conductors. Wet location listed when using a 603 trim. All trims are sold separately and come in a wide variety of styles and finishes, including the 602, 604 and 606 trims. Meets Washington State IECC and MEC energy codes as tested per ASTM-E283 and conforms to City of Chicago IP requirements. Juno Lighting Group's warranty period for general lighting products is one year from date of purchase.

• IC-rating allows housing to be completely covered with insulation • Housing is vertically adjustable to accommodate up to a 1-Inch ceiling thickness and is thermally protected against the improper use of bulbs • When used with Air-Loc gasket (ALG928, sold separately), stops the movement of air, in or out, reducing heating and cooling costs • Shadow-free, knife-edge trim design blends smoothly in to the ceiling and allows architectural continuity with a wide variety of trims • UL Listed, C-UL/CSA certified for damp and wet locations