Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear, Black & C5A2 Impact Power Assisted Crimper

Product Description

Malco TSHD Turboshear Heavy Duty Metal Cutting Attachment Shear , Black Making your power drill a powerful metal-cutting shear is now a more attractive idea than ever before! This well tailored attachment quickly inserts into the chuck of a corded or cordless drill to make fast straight, curved or square cuts in most common sheet metals. A sleek, lightweight aluminum cast shear head and molded drill clamp allow maximum portability and ease to go wherever the work is. The compact telescoping drill clamp adjusts to fit both length and width of popular drill sizes including smaller bodied impact drivers. Optional spacers are stored on clamp for large motor housings. The clamp collar allows the shear head to be rotated 360° and set in any position for optimum tool clearance when navigating profiles or to facilitate easy material flow. The shear's wide-opening jaws can operate at high or low speeds for the control you need to follow a precise trim line, navigate crosscuts through profiles of metal building and roofing panels or cut through layered metal and seams, even the ribs of spiral duct. Heavy-duty gearing and beefy, hardened carbon steel blades combine to offer up to 18-guage (1.22 mm) cutting capacity in mild steel. A lateral blade adjustment capability ensures that optimum cutting performance and maneuverability can be maintained for the life of the blades. Replacement blades are available and can be easily installed on the job. Malco C5A2 Impact Power Assisted Crimper The Malco turbo crimper impact is a simple, compact accessory that works exclusively with the power assistance of impact Driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to O.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe. The turbo crimper impact does not require set-up or adjustment. Just chuck the 1/4 inch power groove drive shaft to your cordless or corded (min.12 volt DC / max. 7 amp AC) impact Driver to immediately begin crimping multiple sizes, types and thickness of pipe and duct, including spiral duct, fast and easy. With the pipe or duct Seam in closed position, start the crimp to one side of the Seam by gently tugging on the Driver trigger and angling the turbo crimper impact onto the metal edge. Walk the Crimper around the pipe circumference in a controlled manner and then angle the Crimper off the metal as the Crimper approaches the other side of the Seam. The turbo crimper impact is five times faster than a manual crimping tool based on Actual Field trials! it is comfortable for any operator to maneuver and, lefties take Note, it works with the impact Driver in forward or reverse. The handy little turbo crimper impact is a Must-Have accessory for every HVAC installer and easily stores in a ready tool pouch or bag when not in use.

• Product 1: Made in the USA • Product 1: Replaceable blades • Product 1: Turns your power drill into a heavy duty power shear • Product 1: Inserts into the chuck of a 14.4 volt or larger A/C or cordless drill • Product 2: Quickly makes your impact driver a power crimper. • Product 2: Crimps 30-24 ga. (0.41-0.71 mm) round metal duct. • Product 2: No set-up or adjustment. • Product 2: Compact, easy to maneuver and balance.