Dealscount Logo
tigertronics slmod13k signalink slusb13k slcab13k
Diginex

Tigertronics SLMOD13K Plug & Play Jumper Module for Tigertronics SignaLink USB SLUSB13K or SLCAB13K Radio Cable

Amazon Price as of 02/14/2025 23:54 GMT+00:00

-18%

$13.43

$16.43

Deal Detector and Price History

We analyze price history to spot good deals

Include Prime Price

🎉 Great Deal

average price $15.93

$2.5 cheaper than average

$13.43 now

$14.55

$16.80

Product Description

SLMOD13K - This jumper module works with the SignaLink USB only (not SL-1+) and is compatible with virtually all Kenwood radios that have a 13-pin Accy Port. There are three different PTT configurations used by Kenwood, so you must set the PTT jumper, as shown in the instructsions, for your radio. Be sure to see Tigertonic's radio wiring and jumper settings page for any special notes on your radio (menu settings, etc.). NOTE: If your radio is not listed below, then we recommend trying jumper setting #1 first, and then setting #2. You will NOT damage your radio or the SignaLink if you use the wrong jumper settings, but your radio will not transmit properly (no output power, "hot" Mic, etc.). Setting #1 - This configuration is the most common and works with early Kenwood radios such as the TS-140, TS-450S, TS-850, TS-870 and TS-950. Some newer radios such as the TS-570D, TS-590S, TS-990 and TS-2000/X also use this setting. Setting #2 - This configuration is less common and is used by some newer radios (TS-690 for example), and some older radios such as the TS-440. Setting #3 - This configuration works with the TS-940 only.

• This jumper module is used with our SignaLink USB p/n SLUSB13K, or our SLCAB13K radio cable • It is compatible with virtually all Kenwood radios that have a 13-pin DIN Accy Port • See product description below for a list of compatible radios.

Reviews

Review AI Summary

🔥 Top
deals you shouldn’t miss!