YTFLOT Manual Pruner Cutter 26 Foot Tree Trimmer Pole Saw with 2 Styles Blade (Green)

Product Description

Parameters Saw blades can cut ≤4 inches (10 cm) branchesScissors can cut ≤0.8 inches (2 cm) branchesSaw Blade Size:13.4X1.6"(34*41mm)FeaturesIt is optional for you to install a 14" detachable saw blade mounted on top pruner for cutting large and thicker branches.Durable steel body, 8 ft rope with handle and pulley operated spring action pruning, carbon steel hardened pruner blade for shearing smaller branches.The hole of this pruner head is suitable for fit any 25mm diameter telescopic rod. Simply install this Aluminum Telescopic Rod into the Pruner head to converts it to a pole saw for pruning high and hard to reach branches, even allow you pruning tall trees, trim overhead without a ladder or at ground level without bending or kneeling. Now pruning your own tree has become more safety and easy than before.Q&AQ:What material are the poles done?A:Epoxy resin and SteelQ:How long can one set go?A:3-26 foot.This item included 3 parts: base, connect parts and head. Only the connect parts can screw together with no quality limited.Q:If the rope is only 8 feet, how do you use this product at the full 26 feet?A:The rope has a T handle at the end, so what need to do when you need more rope, is to take another rope and tie a slip knot in it. Then place this over the T handle and pull it tight. When done, I just remove the extension rope. Realistically, you don’t want 26’ of rope on it at all times. It would constantly get tangled in things on the ground.

• Many of people have saved a lot from their wallet by using this pole saw to trimming their own trees. This pole saw not only can use for reach and cut branches but also it is Non-conductive • It is optional for you to install a 14" detachable saw blade mounted on top pruner for cutting large and thicker branches. Durable steel body, 8 foot rope with wood handle and pulley operated spring action pruning, carbon steel hardened pruner blade for shearing smaller branches. • With Two kinds of blades in three combinations. Meet your daily needs. • The hole of this pruner head is suitable for fit any 25mm diameter telescopic rod. Aluminum Telescopic Rod into the Pruner head to converts it to a pole saw for pruning high and hard to reach branches, even allow you pruning tall trees, trim overhead without a ladder or at ground level without bending or kneeling. • This device works as described. The fiberglass poles are surprisingly rigid, it is reasonably designed to balance the need to minimize weight with stiffness.